分类目录

最新文章

联系我们

喷淋塔净化设备工作原理：废气发作源自作业罩由排风机送入吸收塔，气体在塔内由下向上升，一同吸收液由循环泵输入吸收塔由上向下放射，废气在塔中的填料层上与吸收液逆向触摸而发作化学反响，绝大局部被吸收；经吸收处置后的废气再经过气液别离器和我公司出产的干式吸附塔吸附，这么高浓度的废气经吸收——吸附处置后，抵达高效净化之企图。净化设备是专为处置不一样浓度的(高可达12000Mg/m3),废气而规划的，处置后呈无色气排放，悉数契合国度废气排放标准，关于盐酸、硫酸等酸性废气的处置作用更佳.

设备原理：关于腐蚀性气体（如酸、碱性废气）的办理，如今多选用液体吸收法办理。选用液体吸收法办理该废气，关键在于净化设备的选择。如今，我公司自立开发了净化效率高、操作办理简单、运用寿命长的酸、碱性废气净化技艺与设备。该技艺与商品具有结构简单、能耗低、净化效率高和适用范围广的特征，能有用去掉氯化氢气体（HCl）、氟化氢气体（HF）、氨气（NH3）、硫酸雾（H2SO4）、铬酸雾（CrO3）、氰氢酸气体（HCN）、碱蒸气（NaOH）、硫化氢气体（H2S）、福尔马林（HCHO）等水溶性气体。酸雾废气由风管引进净化塔，经过填料层，废气与氢氧化钠吸收液停止气液两相充分触摸吸收中和反响，酸雾废气经过净化后，再经除雾板脱水除雾后由风机排入大气。吸收液在塔底经水泵增压后在塔顶喷淋而下，终回流至塔底循环运用。净化后的酸雾废气抵达国度排放标准。

The work principle of that purification equipment of the spray tower: the exhaust gas attack originate from the operation cover which is sent into the absorption tower by the exhaust fan, the gas rises from bottom to top in the tower, and the absorption liquid is input into the absorption tower by the circulation pump to radiate from top to bottom; After the absorption and disposal of the exhaust gas through the gas-liquid separator and our company 's dry adsorption tower adsorption, such a high concentration of exhaust gas after absorption - adsorption disposal, reach the attempt of efficient purification. Purification equipment is designed for the disposal of different concentrations ( up to 12000mg / m3 ), waste gas and planning, after the disposal of colorless gas emissions, all meet the national exhaust emission standards, about hydrochloric acid, sulfuric acid and other acidic waste gas disposal effect is better.
Principle of equipment: for handling corrosive gases ( such as acid and alkaline waste gas ), liquid absorption method is often used nowadays. The choice of purification equipment is the key to the selection of liquid absorption method. Now, our company independently developed the purification efficiency is high, simple operation, long service life of acid and alkaline waste gas purification technology and equipment. The technology and the commodity have the characteristics of simple structure, low energy consumption, high purification efficiency and wide application range, and can be used for removing water-soluble gases such as hydrogen chloride gas ( HCl ), hydrogen fluoride gas ( HF ), ammonia gas ( NH3 ), sulfuric acid fog ( H2SO4 ), chromic acid fog ( cro3 ), hydrogen cyanide gas ( HCN ), alkali vapor ( NaOH ), hydrogen sulfide gas ( H2S ), formalin ( HCHO ) and the like The acid mist exhaust gas is introduced into a purification tower by an air pipe, passes through a packing layer, the exhaust gas and the sodium hydroxide absorption liquid stop gas-liquid two-phase full touch absorption and neutralization reaction, and after the acid mist exhaust gas is purified, the acid mist exhaust gas is dehydrated and demixed by a demisting plate and then discharged into the atmosphere by a fan. The absorption liquid is sprayed on the top of the tower after being pressurized by a water pump at the bottom of the tower, and finally flows back to the bottom of the tower for recycling. The purified acid mist exhaust gas reaches the national emission standard.